Name : Makatar Wae-hayee (มักตาร์  แวหะยี)

 
Office : Room#ME250Satang Mongkolsook Building, Department of Mechanical Engineering , Faculty of Engineering, Prince of Songkla University, Hatyai , Songkhla, Thailand 90112
 
Tel: 0-7428-7231, Internal Tel: 7231, Fax: 0-7455-8830
 
E-mail: wmakatar@eng.psu.ac.th, waehahyee@gmail.com   

 

Education:

- Bachelor of industrial technology  in mechanical technology, Rajamangala University of Technology Srivijaya, 2007, GPA=3.27

- Master of Engineering in mechanical engineering, Prince of Songkla University, 2009, GPA=3.33

- Doctor of philosophy in mechanical engineering, Prince of Songkla University, 2014, GPA=3.75

- Postdoctoral researcher in Mechanical Engineering, Prince of Songkla University, 2014-2015

 

Teaching Involvements:

Engineering Thermodynamics

 

Publications:

1. C. Nuntadusit, M. Wae-hayee, A. Bunyajitradulya, S. Eiamsa-ard, 2012, “Heat transfer enhancement by multiple swirling impinging jets with twisted-tape swirl generators”, International Communications in Heat and Mass Transfer, Vol. 39, pp. 102-107, ISI Impact factor = 2.124 (2014).

 

2. C. Nuntadusit, M. Wae-hayee, A. Bunyajitradulya, S. Eiamsa-ard, 2012, “Thermal visualization on surface with a transverse perforated rib”, International Communications in Heat and Mass Transfer, Vol. 39 (5), pp. 634-639, ISI Impact factor = 2.124 (2014).

 

3. C. Nuntadusit, M. Wae-hayee, A. Bunyajitradulya, S. Eiamsa-ard, 2012, “Visualization of flow and heat transfer characteristics for swirling impinging jet”, International Communications in Heat and Mass Transfer, Vol. 39 (5), pp. 640-648, ISI Impact factor = 2.124 (2014).

 

4. C. Nuntadusit, M. Wae-hayee, P. Tekasakul, S. Eiamsa-ard, 2012, “Local heat transfer characteristics of array impinging jets from elongated orifice”, International Communications in Heat and Mass Transfer, Vol. 39 (8), pp. 1154-1164, ISI Impact factor = 2.124 (2014).

 

5. M. Wae-hayee, P. Tekasakul and C. Nuntadusit, 2012, “Influence of nozzle arrangement on flow and heat transfer characteristics for arrays of circular impinging jets” Songklanakarin Journal of Science and Technology, Vol. 35 (2), pp. 203-212, Scopus.

 

6. C. Nuntadusit, M. Waehahyee, 2014, “Document Drying of rubber sheet using impingement of multiple hot air jets” Advanced Materials Research, Vol. 844, pp. 502-506, Scopus.

 

7. N. Kaewchoothong, M. Wae-Hayee, P. Vessakosol, B. Niyomwas, C. Nuntadusit, 2014, “Flow and heat transfer characteristics of impinging jet from expansion pipe nozzle with air entrainment holes” Advanced Materials Research, Vol. 931-932, pp. 1213-1217, Scopus.

 

8. R. Pansang, M. Wae-Hayee, P. Vessakosol, C.Nuntadusit, 2014, “Heat transfer enhancement of impinging row jets in cross-flow with mounting baffles on surface” Advanced Materials Research , Vol. 931-932, pp. 1218-1222, Scopus.

 

9. W. Musika, M. Wae-Hayee, P. Vessakosol, B. Niyomwas, C. Nuntadusit, 2014 “Investigation of flow and heat transfer characteristics of annular impinging jet” Advanced Materials Research , Vol. 931-932, pp.1223-1227, Scopus.

 

10. C. Nuntadusit, P. Muangjunburee, N. Suwanmala, M. Wae-Hayee, 2014 “Study of heat transfer characteristics and kerf quality of flame jet cutting” Advanced Materials Research, Vol. 931-932, pp. 392-396, Scopus.

 

11. M. Wae-hayee, P. Tekasakul, S. Eiamsa-ard and C. Nuntadusit, 2014, “Effect of cross-flow velocity on flow and heat transfer characteristics of impinging jet with low jet-to-plate distance” Journal of Mechanical Science and Technology, Vol. 28 (7), pp. 2909-2917, ISI Impact factor = 0.703 (2013).

 

12. M. Wae-hayee, P. Tekasakul, and C. Nuntadusit, 2014, “Cross-flow effect on flow and heat transfer characteristics of impinging jets in a confined channel” Engineering Transactions, Vol. 17, pp. 60-72, TCI.

 

13. M. Wae-hayee, P. Tekasakul, S. Eiamsa-ard and C. Nuntadusit, 2014, “Flow and heat transfer characteristics of in-line impinging jets with cross-flow at short jet-to-plate distance” Experimental Heat Transfer, Vol. 28, pp. 511-530, ISI Impact factor = 0.979 (2014).

 

14. N. Kaewchoothong, M. Wae-Hayee, P. Vessakosol, C. Nuntadusit, 2015, “Effect of modified expansion pipe nozzle on heat transfer enhancement with impinging jet” Rangsit Journal of Arts and Sciences, Vol. 5(1), pp. 49-62, TCI.

 

15. C. Nuntadusit, I. Piya, M. Wae-Hayee, S. Eiamsa-ard, 2015 “Heat transfer characteristics in a channel fitted with zigzag-cut baffles” Journal of Mechanical Science and Technology, Vol. 29 (6), pp. 2547-2554, ISI Impact factor = 0.703 (2013).

 

 


International Conferences:

 

1. C. Nuntadusit, M. Waehahyee, A. Bunyajitradulya and T. Shakouchi, “Heat transfer enhancement for a swirling jet impingement” The ISFV14 - 14th International Symposium on Flow Visualization, June 21-24, 2010, EXCO Daegu, Korea.

 

2. M. Wae-hayee, C. Nuntadusit, and P. Tekasakul “Effect of velocity ratio on flow and heat transfer characteristics of an impinging jet in crossflow”, The 5th PSU-UNS International Conference on Engineering and Technology (ICET-2011), Phuket, May 2-3, 2011 Prince of Songkla University, Faculty of Engineering Hat Yai, Songkhla, Thailand.

 

3. M. Wae-hayee, C. Nuntadusit, and P. Tekasakul  “Heat transfer enhancement on a surface under arrays of impinging jets: effect of jet flow arrangement”, The 5th PSU-UNS International Conference on Engineering and Technology (ICET-2011), Phuket, May 2-3, 2011, Prince of Songkla University, Faculty of Engineering Hat Yai, Songkhla, Thailand.

 

4. M. Wae-hayee, C. Nuntadusit, and P. Tekasakul “Heat Transfer Enhancement on Surface with Jets Impingement from Some Arrays of Elongated Round Orifices”, The 2nd TSME International Conference on Mechanical Engineering (TSME-ICoME 2011), October 19-21, 2011, Krabi, Thailand.

 

5. M. Wae-hayee and C. Nuntadusit, “Flow and Heat transfer Characteristics of Non-circular Impinging jet in Crossflow” The 8th International Conference on Flow Dynamics (ICFD2011), November 9-11, 2011, Sendai, Miyagi, Japan.

 

6. M. Wae-hayee C. Nuntadusit, and P. Tekasakul, “Heat Transfer Enhancement of an Impinging Jet in Crossflow by Elongated Round Orifice” The 10th International Gas Turbine Congress 2011 Osaka (IGTC'11), November 13-18, 2011, Osaka, Japan.

 

7. B. Kaewkraikrong, M. Wae-hayee, T. Leevijit and C. Nuntadusit, “Study on Heat Transfer Characteristics of Impinging Jet with Delta Tabs Attachment at Pipe Exit”, The 10th International PSU Engineering Conference, May 14-15, 2012, Songkhla, Thailand.

 

8. K. Songkaor, M. Wae-hayee, T. Leevijit and C. Nuntadusit, “Effect of Nozzle Geometry on Flow Characteristic of Jet from Expansion Pipe Nozzle”, The 10th International PSU Engineering Conference, May 14-15, 2012, Songkhla, Thailand.

 

9. C. Nuntadusit and M. Wae-hayee, “Flow and Heat Transfer Characteristics of Row of Jet Impingement from Elongated Orifice under Cross-flow” The 4th International Conference on Jets, Wakes and Separated Flows (ICJWSF2013), September 17-21, 2013, Nagoya, Japan.

 

10. C. Nuntadusit, I. Piya, M. Wae-hayee,  “Heat Transfer Augmentation on Flat Surface with Some Zigzag Cut-Baffles”, The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME2013), November 18-23, 2013, Nara, Japan.

 

11. A. Srichairattana, M. Wae-hayee, P. Vessakosol and C. Nuntadusit, “Heat transfer augmentation for impinging jet from slot nozzle with cylindrical rod”, The 25th International Symposium on Transport Phenomena, 5-7 November 2014, Krabi, Thailand.

 

12. W. Musika, M. Wae-hayee, P. Vessakosol and C. Nuntadusit, “Investigation of flow and heat transfer characteristics of radial impinging jet”, The 25th International Symposium on Transport Phenomena, 5-7 November 2014, Krabi, Thanilad.

 

13. M. Wae-hayee, S. Petchuchuy, R. Yamsaengsung and C. Nuntadusit, “Effect of jet-to-confinement wall distance on heat transfer characteristics of impinging jet array”, The 8th Asia-Pacific Drying Conference (ADC 2015), 10-12 August 2015, Kuala Lumpur, Malaysia.

 

14. S. Petchuchuy, M. Wae-hayee, R. Yamsaengsung and C. Nuntadusit, “Comparison drying characteristics of pumpkin using tray dyer and jet impingement dryer”, The 8th Asia-Pacific Drying Conference (ADC 2015), 10-12 August 2015, Kuala Lumpur, Malaysia.